Evaporative Emission (EVAP) Canister Replacement

EVAPORATIVE EMISSION (EVAP) CANISTER REPLACEMENT

REMOVAL PROCEDURE
1. Remove the spare tire. Reference the owners manual for additional information if needed.
2. Raise the vehicle. Refer to Vehicle Lifting.




3. Disconnect the evaporative emission (EVAP) vapor pipe (1) from the EVAP canister.
4. Disconnect the EVAP purge pipe (2) from the EVAP canister.
5. Disconnect the EVAP vent pipe (3) from the EVAP canister.




6. Remove the bolts (1) from the EVAP mounting bracket (2).
7. Remove the EVAP canister and bracket assembly from the vehicle.




8. Remove the bolt (1) attaching the EVAP canister (3) to the mounting bracket (2).
9. Remove the EVAP canister (3) from the mounting bracket (2).




10. Remove the EVAP retaining bracket (2) from the EVAP canister (3) by releasing the retaining bracket clip (1) from the EVAP canister (3).

INSTALLATION PROCEDURE




1. Install the EVAP retaining bracket (2) to the EVAP canister (3) ensuring the retaining bracket clip (1) is fully engaged.




2. Install the EVAP canister (3) to the mounting bracket (2).
3. Install the bolt (1) attaching the EVAP canister (3) to the mounting bracket (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 20 N.m (15 lb ft).




4. Install the EVAP canister and bracket assembly to the vehicle.
5. Install the bolts (1) to the EVAP mounting bracket (2).

Tighten the bolts to 20 N.m (15 lb ft).




6. Connect the evaporative emission (EVAP) vapor pipe (1) to the EVAP canister.
7. Connect the EVAP purge pipe (2) to the EVAP canister.
8. Connect the EVAP vent pipe (3) to the EVAP canister.
9. Lower the vehicle.
10. Install the spare tire. Reference the owners manual for additional information if needed.