Switch Replacement - Endgate Window Interior Emergency

SWITCH REPLACEMENT - ENDGATE WINDOW INTERIOR EMERGENCY

REMOVAL PROCEDURE
1. Partially remove the left rear quarter trim panel to access the switch retaining tabs located behind the panel.




2. Disconnect the electrical connector to the switch.
3. Release the tabs (1) retaining the switch to the panel.




4. Remove the switch from the vehicle.

INSTALLATION PROCEDURE




1. Position and index the switch to the panel.




2. Install the switch to the panel ensuring the retaining tabs (1) are fully seated.
3. Connect the electrical connector to the switch.
4. Install the rear quarter trim panel.