Seat Cushion Trim Panel Replacement - Rear No.1 (TrailBlazer EXT, Envoy XL, Envoy XUV)

Seat Cushion Trim Panel Replacement - Rear No.1 (TrailBlazer EXT, Envoy XL, Envoy XUV)

Removal Procedure

1. Remove the seat from the vehicle.




2. Remove the rear seat bracket trim covers (1).
3. Remove the rear seat bracket mounting nuts (2).
4. Remove the rear seat bracket.




5. Remove the 2 bolts (2) securing the support (1) to the seat cushion trim panel.




6. Remove the seat cover J-strips (1) from the seat cushion trim panel (2).




7. Remove the screws securing the seat cushion trim panel to the seat frame.
8. Remove the seat cushion trim panel.

Installation Procedure





Notice: Refer to Fastener Notice in Service Precautions.

1. Install the screws securing the seat cushion trim panel to the seat cushion assembly.

Tighten the rear seat cushion trim panel screws to 2 N.m (18 lb in).




2. Install the seat cover J-strips (1) to the seat cushion trim panel (2).




3. Install the 2 bolts (2) securing the support (1) to the seat cushion trim panel.

Tighten the rear seat support bolts to 35 N.m (26 lb ft).




4. Install the rear seat bracket with the 4 mounting nuts (2).

Tighten the rear seat bracket mounting nuts to 25 N.m (18 lb ft).

5. Install the rear seat bracket trim covers (1).
6. Install the seat in the vehicle.