Power Steering Pulley Replacement

Power Steering Pulley Replacement (4.2L)

Tools Required
^ J25033-C Power Steering Pump Pulley Installer
^ J25034-C Power Steering Pump Pulley Remover

Removal Procedure





1. Remove the drive belt.
2. Remove the power steering pump pulley using J25034-C.

Installation Procedure





1. Install the power steering pump pulley to the end of the power steering pump shaft.
2. Install the power steering pump pulley to the power steering pump using J25033-C.





3. Install the power steering pump pulley (1) flush against the end of the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 inch).
4. Install the drive belt.