Lock Replacement - Rear Door Remote

Lock Replacement - Rear Door Remote

Removal Procedure

1. Remove the trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors) (Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54) (Trim Panel Replacement - Rear Door (E54)) .
2. Remove the water deflector. Refer to Water Deflector Replacement (Service and Repair) .




3. Remove the control rods from the remote lock.

1. Pry the clip anchor out of the hole.
2. Push the clip away from the lever.
3. Pull the rod and the clip away from the lever.





4. Remove the remote lock nuts.
5. Remove the lock.



Installation Procedure





1. Install the clips to the remote lock.
2. Install the remote lock.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the remote lock nuts.

Tighten the remote lock nuts to 7 N.m (62 lb in).





4. Install the control rods through the clips to the remote lock.
5. Install the water deflector. Refer to Water Deflector Replacement (Service and Repair) .
6. Install the trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors) (Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54) (Trim Panel Replacement - Rear Door (E54)) .