Headlamp Replacement

HEADLAMP REPLACEMENT

REMOVAL PROCEDURE




1. Turn off the headlamp switch.
2. Open the hood.
3. Remove the screw that retains the corner capsule to the composite headlamp.




4. Remove the three bolts that retain the composite headlamp.
5. Remove the headlamp.
6. Disconnect the headlamp electrical connectors.
7. Remove the headlamp bulbs.

INSTALLATION PROCEDURE




1. Install the headlamp bulbs.
2. Connect the headlamp electrical connectors.
3. Install the headlamp assembly.
4. Install the bolts in order to retain the composite headlamp.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the composite headlamp bolts to 12.5 Nm (110 lb in).




5. Install the corner capsule.
6. Install the corner capsule screw.

Tighten the corner capsule screw to 5 Nm (44 lb in).

7. Close the hood.