Heating Hoses Replacement - Outlet
HEATING HOSES REPLACEMENT - OUTLETTOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Remove the air cleaner.
2. Drain the engine coolant.
3. Remove the coolant recovery reservoir.
4. Remove the heater hose support clamp bolt (5).
5. Using the J 38185, reposition the outlet heater hose clamp from the heater core.
6. Remove the outlet heater hose (3) from the heater core.
7. Using the J 38185, reposition the outlet heater hose clamp from the water bypass valve.
8. Remove the outlet heater hose (3) from the water bypass valve.
INSTALLATION PROCEDURE
1. Install the outlet heater hose (3) to the water bypass valve.
2. Using the J 38185, reposition the outlet heater hose clamp to the water bypass valve.
3. Install the outlet heater hose (3) to the heater core.
4. Using the J 38185, reposition the outlet heater hose clamp to the heater core.
5. Install the heater hose support clamp to the heater core.
6. Install the heater hose support bolt (5).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 4 N.m (35 lb in).
7. Install the coolant recovery reservoir.
8. Fill the cooling system.
9. Install the air cleaner.