Engine Cover Replacement

ENGINE COVER REPLACEMENT

REMOVAL PROCEDURE
1. Remove the instrument panel extension.




2. Remove the floor air outlet duct.
3. Remove the bolts from the brackets:
1. Loosen the bolt.
2. Rotate the bracket out of the way.




4. Remove the latches.




5. Remove the screws.




6. Remove the engine cover.

INSTALLATION PROCEDURE




1. Install the engine cover.




2. Install the screws to the engine cover.Do not fully tighten the screws.




3. Install the latch screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the latch screws to 4 Nm (35 lb in).

4. Install the engine cover bolts to the brackets.

Tighten the engine cover bolt to 25 Nm (18 lb ft).




5. Insert the floor air outlet duct.
6. Insert the instrument panel extension.