Engine Cover Replacement

Engine Cover Replacement

Removal Procedure

1. Remove the instrument panel extension. Refer to Instrument Panel (I/P) Extension Replacement (Instrument Panel (IP) - Extension Replacement) in Instrument Panel, Gages and Console.




2. Remove the floor air outlet duct. Refer to Air Outlet Replacement - Center Floor in Heating, Ventilation and Air Conditioning.
3. Remove the bolts from the brackets:

1. Loosen the bolt.
2. Rotate the bracket out of the way.





4. Remove the latches.




5. Remove the screws.




6. Remove the engine cover.



Installation Procedure





1. Install the engine cover.




2. Install the screws to the engine cover.
Do not fully tighten the screws.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the latch screws.

Tighten the latch screws to 4 N.m (35 lb in).

4. Install the engine cover bolts to the brackets.

Tighten the engine cover bolt to 25 N.m (18 lb ft).





5. Insert the floor air outlet duct. Refer to Instrument Panel (I/P) Extension Replacement (Instrument Panel (IP) - Extension Replacement) in Instrument Panel, Gages and Console.
6. Insert the instrument panel extension. Refer to Air Outlet Replacement - Center Floor in Heating, Ventilation and Air Conditioning.