Instrument Panel (IP) - Carrier Support Replacement

INSTRUMENT PANEL (I/P) CARRIER SUPPORT REPLACEMENT

REMOVAL PROCEDURE
1. Remove the instrument panel from the vehicle.
2. Remove the bolts that retain the carrier support to the cowl side panel.




3. Remove the carrier support from the vehicle.

INSTALLATION PROCEDURE




1. Install the carrier support to the vehicle.
2. Install the bolts that retain the carrier support to the cowl side panel.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts that retain the carrier support to the cowl side panel to 25 Nm (18 lb ft).

3. Install the instrument panel to the vehicle.