Seat Back Cover and Pad Replacement (With RPO Code YC7)

SEAT BACK COVER AND PAD REPLACEMENT (WITH RPO CODE YC7)

REMOVAL PROCEDURE
1. Remove the bucket seat from the vehicle.
2. Remove the headrest.
3. Remove the armrests.
4. Disconnect the hook-and-loop fasteners that retain the seat cushion cover to the pad along the seat back break line.




5. Remove the seat back cover and pad from the seat back.

INSTALLATION PROCEDURE




1. Install the seat back pad to the seat back frame.

IMPORTANT: For the best finished appearance when attaching the seat back cover to the pad, proceed as follows:

2. Center the seat back cover on the pad.
3. Starting at the top and working down the sides, apply pressure along the break line. This helps attach the seat back cover to the J-hook fasteners.
4. Reset the hook-and-loop fasteners that retain the seat back cushion to the pad.
5. Install the armrests.
6. Install the headrest.
7. Install the bucket seat in the vehicle.