Heater Pipe Replacement - Auxiliary Front

HEATER PIPE REPLACEMENT - AUXILIARY FRONT

REMOVAL PROCEDURE
1. Drain the engine coolant.




2. Raise the vehicle. Refer to Vehicle Lifting.
3. Remove the front pipes (5) from the rear pipes.
4. Remove the bolts (3) that retain the front pipes (5) to the body.
5. Remove the clips (4) that retain the front pipes (5) to the body.
6. Remove the auxiliary heater front pipes (5) from the heater hoses (1).
7. Remove the auxiliary heater front pipes (5).

INSTALLATION PROCEDURE
1. Install the auxiliary heater front pipes (5).
2. Connect the auxiliary heater front pipes (5) to the heater hoses (1).




3. Install the front pipe retaining clips (4) that retains the front pipes (5) to the body.
4. Install the bolts (3) that retain the front pipes (5) to the body.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 4 N.m (35 lb in).

5. Connect the auxiliary heater front pipes (5) to the rear pipes.
6. Fill the cooling system with engine coolant.
7. Lower the vehicle.