Battery Tray Replacement

BATTERY TRAY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the battery.




2. Disconnect the VCM retaining clip and position the VCM away from the battery tray.




3. Remove the battery tray retaining bolts.
4. Remove the battery tray.

INSTALLATION PROCEDURE




1. Install the battery tray.
2. Install the battery tray retaining bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the battery tray retaining bolts to 25 N.m (18 lb ft).




3. Install the VCM and the VCM retaining clip.
4. Install the battery.