Engine Oil: Service and Repair

Engine Oil and Oil Filter Replacement

Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.





2. Remove the oil pan drain plug and drain the engine oil in a suitable container.





3. Remove the engine oil filter.
4. Inspect to ensure the engine oil filter gasket is removed.

Installation Procedure
1. Lubricate the engine oil filter gasket with clean engine oil.





2. Install the engine oil filter.
3. Follow the tightening instructions on the oil filter.





Notice: Refer to Fastener Notice in Service Precautions.

4. Install the oil pan drain plug to the oil pan.
^ Tighten the oil pan drain plug to 25 Nm (18 ft. lbs.).
5. Lower the vehicle.
6. Fill the engine with the proper capacity and quality of engine oil.
7. Operate the engine, check for leaks and oil pressure.