Sliding Door: Adjustments

Door Adjustment - Sliding

Up and Down Adjustment

1. Remove the sliding side door upper roller cover. Refer to Roller Bracket Cover Replace - Sliding Door Upper
2. Remove the sliding side door lower roller cover.




3. Loosen the bolts that retain the upper front roller to the door.




4. Loosen the bolts that retain the lower front roller to the door.
5. Loosen the nuts that retain the rear roller to the door.
6. Adjust the door up or down until you obtain the desired position.

Notice: Refer to Fastener Notice in Cautions and Notices.

7. Tighten the nuts that retain the rear roller to the door.

Tighten the nuts to 25 N.m (18 lb ft).





8. Tighten the bolts that retain the upper front roller to the door.

Tighten the bolts to 25 N.m (18 lb ft).





9. Tighten the bolts that retain the lower front roller to the door.

Tighten the bolts to 25 N.m (18 lb ft).

10. Install the sliding side door lower roller cover.
11. Install the sliding side door upper roller cover. Refer to Roller Bracket Cover Replace - Sliding Door Upper



In and Out Adjustment

1. Remove the sliding side door upper roller cover. Refer to Roller Bracket Cover Replace - Sliding Door Upper
2. Remove the sliding side door lower roller cover.




3. Loosen the bolts that retain the upper front roller to the bracket.




4. Loosen the bolts that retain the lower front roller to the bracket.
5. Adjust the door in or out until you obtain the desired position.




6. Tighten the bolts that retain the upper front roller to the bracket.

Tighten the bolts to 25 N.m (18 lb ft).





7. Tighten the bolts that retain the lower front roller to the bracket.

Tighten the bolts to 25 N.m (18 lb ft).

8. Install the sliding side door lower roller cover.
9. Install the sliding side door upper roller cover. Refer to Roller Bracket Cover Replace - Sliding Door Upper