14. Valve Rocker Arm Cover Removal - Right

Valve Rocker Arm Cover Removal - Right





1. Important: Do not remove the ignition coils from the valve rocker arm cover unless required.

Remove the ignition coil bracket bolts from the rocker arm cover, if required.
2. Remove the ignition coil and bracket assembly from the cover.





3. Remove the oil fill cap from the oil fill tube.
4. Remove the oil fill tube.





5. Remove the valve rocker arm cover bolts.
6. Remove the valve rocker arm cover.





7. Remove the gasket (504) from the cover.
8. Discard the gasket. The bolt grommets may be used again if not damaged.