Heater Hose - Inlet

HEATER HOSE REPLACEMENT - INLET

TOOLS REQUIRED
J 38185 Hose Clamp Pliers

REMOVAL PROCEDURE
1. Partially drain the engine coolant. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the inlet heater hose clamps using the J 38185.




3. Remove the inlet heater hose.

INSTALLATION PROCEDURE




1. Install the inlet heater hose.
2. Install the inlet heater hose clamps using the J 38185.
3. Fill the engine coolant. Refer to Draining and Filling Cooling System in Cooling System.