Seat Back Replacement - Rear

Seat Back Replacement - Rear

Removal Procedure

1. Remove the rear seat from the vehicle. Refer to Seat Replacement - Rear Bench (Seat Replacement - Rear Bench) .
2. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear (Service and Repair) .





Important: Note the position and the length of the bolts removed. This will assist with reassembly.


3. Remove the right and left bolts that retain the seat back frame to the seat back hinges.




4. Remove the seat back frame.



Installation Procedure





1. Install the seat back frame.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts that retain the seat back frame to the seat back hinges in the locations noted during disassembly.

Tighten the bolts to 30 N.m (22 lb ft).

3. Install the seat back cover and pad. Refer to Seat Cushion Cover and Pad Replacement - Rear (Seat Cushion Cover and Pad Replacement - Rear) .
4. Install the rear seat in the vehicle. Refer to Seat Replacement - Rear Bench (Seat Replacement - Rear Bench) .