Park/Turn Signal Lamp Replacement (Uplevel Vehicles)

PARK/TURN SIGNAL LAMP REPLACEMENT (UPLEVEL VEHICLES)

REMOVAL PROCEDURE




1. Remove the park/turn signal lamp (3) from the grille.
2. Disconnect the bulb socket(s) (1) from the park/turn signal lamp by turning the bulb sockets in a counterclockwise direction.
3. Remove the bulb(s) (1) from the socket.

INSTALLATION PROCEDURE




1. Install the bulb(s) (1) into the socket by turning the bulb sockets in a clockwise direction.
2. Connect the bulb socket(s) (1) into the park/turn signal lamp.
3. Install the park/turn signal lamp (3) to the grille (5).