Energy Storage Box (ESB) 120V Receptacle Replacement

ENERGY STORAGE BOX (ESB) 120V RECEPTACLE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the receptacle face plate.
2. Remove the receptacle outlet screws (2).
3. Remove the receptacle outlet (3) from the receptacle box (1).
4. Disconnect the receptacle electrical connections.

INSTALLATION PROCEDURE




1. Connect the receptacle electrical connections.
2. Install the receptacle outlet (3) to the receptacle box (1).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the receptacle outlet screws (2).

Tighten the screws to 2 N.m (18 lb in).

4. Install the receptacle face plate.