Energy Storage Box (ESB) High Current Connector Power Cable Replacement - to Battery 3

ENERGY STORAGE BOX (ESB) HIGH CURRENT CONNECTOR POWER CABLE REPLACEMENT - TO BATTERY 3

REMOVAL PROCEDURE




1. Remove the energy storage box (ESB) intermediate cover.
2. Remove the power cable nuts (1) from battery 3 and the high current connector (HCC).




3. Remove the power cable (2) from battery 3 and the HCC.

INSTALLATION PROCEDURE




1. Install the power cable (2) to battery 3 and the HCC.




2. Install the power cable nuts (1) to battery 3 and the HCC.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts to 10 N.m (89 lb in).

3. Install the ESB intermediate cover.