Shift Lever - Without Tow/Haul Switch

Shift Lever Replacement (Without Tow/Haul Switch)

Removal Procedure





1. Roll back the seal until the TORX� head shift lever screw (2) is exposed.
2. Remove the TORX� head shift lever screw (2).
3. Remove the shift lever.

Installation Procedure





1. Install the shift lever (1).

2. Notice:
Refer to Fastener Notice in Service Precautions.

Install the TORX� head shift lever screw (2).
^ Tighten the screw to 1.5 Nm (13 inch lbs.).
3. Roll the seal over the TORX� head shift lever screw (2).