Battery Relay Replacement - Auxiliary

BATTERY RELAY REPLACEMENT - AUXILIARY

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the auxiliary battery negative cable.
2. Reposition the boot (3) to expose the stud.
3. Remove the auxiliary battery positive cable nut (2).
4. Remove the auxiliary battery positive cable from the auxiliary battery relay.




5. Reposition the boot to expose the stud.
6. Remove the auxiliary battery positive cable nut.
7. Remove the auxiliary battery positive cable from the auxiliary battery relay.




8. Disconnect the auxiliary battery relay electrical connector (1).




9. Remove the auxiliary battery relay nuts.
10. Remove the auxiliary battery relay.

INSTALLATION PROCEDURE




1. Install the auxiliary battery relay.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the auxiliary battery relay nuts.

Tighten the nuts to 9 N.m (80 lb in).




3. Connect the auxiliary battery relay electrical connector (1).




4. Install the auxiliary battery positive cable to the auxiliary battery relay.
5. Install the auxiliary battery positive cable nut.

Tighten the nut to 9 N.m (80 lb in).

6. Position the boot to cover the stud.




7. Install the auxiliary battery positive cable to the auxiliary battery relay.
8. Install the auxiliary battery positive cable nut (2).

Tighten the nut to 9 N.m (80 lb in).

9. Position the boot (3) to cover the stud.
10. Connect the auxiliary battery negative cable.