Radiator Replacement

Radiator Replacement (6.6L)

Removal Procedure





1. Remove the radiator inlet hose for the 6.6L engine.
2. Remove the radiator outlet hose for the 6.6L engine.
3. Remove the lower fan shroud.
4. If necessary, disconnect the automatic transmission oil cooler lines from the radiator.
5. Remove the radiator bolts.
6. Remove the radiator.

Installation Procedure





1. Install the radiator.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the radiator bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. If necessary, connect the automatic transmission oil cooler lines to the radiator.
4. Install the lower fan shroud.
5. Install the radiator outlet hose for the 6.6L engine.
6. Install the radiator inlet hose for the 6.6L engine.