Fuel Delivery and Air Induction: Service and Repair

FUEL SYSTEM CLEANING

IMPORTANT:
- Only use oil free compressed air to blow out the fuel pipes.
- Inspect the fuel tank internally and clean the fuel tank if you find a plugged fuel filter.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Remove the sending unit.
2. Inspect the fuel strainer. Replace a contaminated strainer and inspect the fuel pump.
3. Inspect the fuel pump inlet for dirt and debris. Replace the fuel pump if you find dirt or debris in the fuel pump inlet.
4. Flush the fuel tank with hot water.

IMPORTANT: When flushing the fuel tank, handle the fuel and water mixture as a hazardous material. Handle the fuel and water mixture in accordance with all applicable local, state, and federal laws and regulations.

5. Pour the water out of the sending unit opening. Rock the tank to be sure that removal of the water from the tank is complete.
6. Install the sending unit.