Filler Tube and Seal Replacement

Filler Tube and Seal Replacement
Removal Procedure





1. Remove the oil level indicator.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove the fill tube bracket nut.
4. Place a drain pan under the transmission.





5. Remove the fill tube.
6. Remove the transmission fill tube seal.

Installation Procedure





1. Install the transmission fill tube seal.
2. Install the fill tube.
3. Remove the drain pan from under the transmission.





4. Install the fill tube bracket nut.
5. Lower the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

6. Install the oil level indicator.
^ Tighten the nut to 47 Nm (35 lb ft).
7. Fill the transmission to the proper level with Dexron(R) III transmission fluid.