46. 1-2-3-4 Clutch Fiber Plate Inspection

1-2-3-4 Clutch Fiber Plate Inspection





Important:
^ Measure as described below at a minimum of 3 locations.
^ Replace any 1-2-3-4 clutch fiber plate that does not meet specifications.

1. Measure the thickness of each 1-2-3-4 clutch fiber plate (1) at dimension A.
The 1-2-3-4 clutch friction plate minimum thickness is 2.375 mm (0.093 inch).
2. Measure the oil groove depth of each plate at dimension B.
The oil groove minimum depth is 0.200 mm (0.0079 inch).

Important: Check the plates for coning on a level surface.

3. Measure the cone of each plate (1) at dimension A.
The fiber plate maximum cone is 0.255 mm (0.010 inch).