Transmission Housing Oil Seal Replacement - Rear

Transmission Housing Oil Seal Replacement - Rear (2WD)
^ Tools Required
- J 23129 Universal Seal Remover
- J 6125-1BSlide Hammer
- J 36503 Extension Housing Seal Installer

Removal Procedure





1. Remove the rear propeller shaft.
2. Remove the rear oil seal using J 6125-1B (1) and J 23129 (2).

Installation Procedure





1. Using J 36503 install the NEW rear oil seal.
2. Install the rear propeller shaft.
3. Check to transmission fluid level. Add if necessary.
4. Lower the vehicle.