58. Water Crossover Clean and Inspect

Water Crossover Cleaning and Inspection
Cleaning Procedure





1. Clean the water crossover (308) and thermostat housing (311) in solvent.

2. Caution: Refer to Safety Glasses Caution in Service Precautions.

Dry the components with compressed air.

Inspection Procedure





1. Inspect the water crossover (308) for the following:
^ Corrosion or damage to the gasket sealing surfaces
^ Corrosion or damage to the bypass hose fitting
^ Corrosion or damage to the heater hose fitting
^ Corrosion or damage to the threads of the water outlet

2. Inspect the thermostat housing (311) for corrosion or damage.