Rear Wheel Steering Control Module Bracket Replacement

Rear Wheel Steering Control Module Bracket Replacement

Removal Procedure
1. Remove the rear wheel steering control module from the bracket.
2. Remove the bolts retaining the bracket (2) to the frame.





3. Remove the bracket (2) from the vehicle.

Installation Procedure





1. Install the bracket (2) to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolts retaining the bracket (2) to the frame.
^ Tighten the bracket retaining bolts to 10 Nm (81 inch lbs.).
3. Install the rear wheel steering control module to the vehicle.