Shift Lever - Without Tow/Haul Switch

Shift Lever Replacement (Without Tow/Haul Switch)

Removal Procedure





1. Roll back the seal until the TORX head shift lever screw (2) is exposed.
2. Remove the TORX head shift lever screw (2).
3. Remove the shift lever.

Installation Procedure





1. Install the shift lever (1).

2. Install the TORX head shift lever screw (2).
^ Tighten the screw to 20 Nm.

Notice: Refer to Fastener Notice in Service Precautions.

3. Roll the seal over the TORX head shift lever screw (2).