Antenna, Radio: Service and Repair

ANTENNA REPLACEMENT - DIGITAL RADIO

REMOVAL PROCEDURE
1. Lower the front part of the headliner. Refer to Headliner Replacement in Interior Trim.

NOTE:
- DO NOT apply paint or clear coat to the antenna. This will damage the function of the antenna, causing poor reception or loss of signal reception.
- Use care when removing or installing the headliner. Excessive bending will damage the headliner.




2. Disconnect the cables (4) from the antenna base (1).
3. Remove the bolt (3) and expansion sleeve (2).
4. Remove the antenna base (1) from the roof.

INSTALLATION PROCEDURE




1. Place the antenna base to the roof opening.
2. Install the expansion sleeve (2) and the bolt (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nut to 6 N.m (53 lb in).

3. Connect the antenna cables (4).
4. Install the headliner.