Latch Replacement - Instrument Panel (I/P) Compartment

Latch Replacement - Instrument Panel (I/P) Compartment

Removal Procedure

1. Open the instrument panel (I/P) storage compartment.




2. Remove the screws retaining the storage compartment handle assembly.
3. Remove the handle assembly from the vehicle.

Installation Procedure




1. Install the handle assembly the storage compartment.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screws retaining the handle assembly to the storage compartment.

Tighten the screws to 3 N.m (27 lb in).

3. Ensure the handle assembly is working properly.