Rear Bumper: Service and Repair

Bumper Replacement - Rear (Canyon/Colorado)

Removal Procedure

1. Remove the license plate lamp harness.




2. Remove the bumper bracket to frame bolts.
3. Remove the bumper.
4. Remove the bracket to bumper bolts.

Installation Procedure




1. Install the bumper brackets to the bumper.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bumper bracket to bumper bolts.

Tighten the bracket to bumper bolts to 160 N.m (118 lb ft).

3. Install the bumper to the vehicle.
4. Install the bumper bracket to frame bolts.

Tighten the bumper to frame bolts to 160 N.m (118 lb ft).