Rear (Crew Cab)

SEAT BELT BUCKLE REPLACEMENT - REAR (CREW CAB)

REMOVAL PROCEDURE




1. Remove the rear bench seat from the vehicle.
2. Remove the grommet securing the rear seat belt buckle assembly to the seat.
3. Remove the rear seat belt buckle assembly from the seat cushion.

INSTALLATION PROCEDURE




1. Install the rear bench seat in the vehicle.
2. Install the rear seat belt buckle through the seat cushion loop and position the seat belt buckle assembly over the rear bench seat mounting hole.
3. Install the rear bench seat mounting nut.

Tighten the rear bench seat mounting nut to 52.5 N.m (39 lb ft).

NOTE: Refer to Fastener Notice in Service Precautions.