Trim Pad Replacement - Instrument Panel (I/P)

TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P)

REMOVAL PROCEDURE




1. Disable the SIR. Refer to SIR Disabling and Enabling Zone 5 in Restraint Systems.

CAUTION: Refer to SIR Caution in Service Precautions.

2. Remove the knee bolster trim panel.
3. Remove the instrument panel (I/P) upper trim pad.
4. Remove the screws (1, 3) from the I/P trim pad.
5. Remove the I/P trim pad (2).

INSTALLATION PROCEDURE




1. Install the I/P trim pad (2) to the I/P.
2. Install the screws (1, 3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws (1, 3) to 3 N.m (26 lb in).

3. Install the I/P upper trim pad.
4. Install the knee bolster trim panel.
5. Enable the SIR. Refer to SIR Disabling and Enabling Zone 5 in Restraint Systems.