Heater Coolant Heater Glow Plug Replacement

HEATER COOLANT HEATER GLOW PLUG REPLACEMENT

TOOLS REQUIRED
J-38125 Terminal Repair Kit

REMOVAL PROCEDURE
1. Remove the fuel operated heater (FOH).
2. Remove the FOH control unit.




3. Using J-38125-560 remove the glow plug wiring from the electrical connector.

IMPORTANT: Note the routing of the wiring to ensure proper installation.

4. Remove the glow plug from the coolant heater.

INSTALLATION PROCEDURE




1. Install the glow plug to the coolant heater.

Tighten to 2.5 N.m (22 lb in).

NOTE: Refer to Component Fastener Tightening Notice.

2. Install the glow wiring to the electrical connector.
3. Install the FOH control unit.
4. Install the FOH.
5. Lower the vehicle.