Knee Bolster Bracket Replacement - Right

KNEE BOLSTER BRACKET REPLACEMENT - RIGHT

REMOVAL PROCEDURE




1. Remove the knee bolster trim panel.

CAUTION: Refer to SIR Caution in Service Precautions.

2. Remove the body control module (BCM).
3. Remove the nuts (1) securing the knee bolster bracket to the instrument panel (I/P).
4. Remove the knee bolster bracket (2).

INSTALLATION PROCEDURE




1. Align the knee bolster bracket (2) to the I/P.
2. Install the nuts (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts (1) to 10 N.m (88 lb in).
3. Install the knee bolster trim panel.
4. Install the body control module.