Heater Hose - Inlet

HEATER HOSE REPLACEMENT - INLET

TOOLS REQUIRED
J 38185 Hose Clamp Pliers

REMOVAL PROCEDURE
1. Partially drain the engine coolant. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill) in Cooling System.
2. Remove the inlet heater hose clamps using the J 38185.




3. Remove the inlet heater hose.

INSTALLATION PROCEDURE




1. Install the inlet heater hose.
2. Install the inlet heater hose clamps using the J 38185.
3. Fill the engine coolant. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill) in Cooling System.