18. Transmission Oil Pump Assembly Removal

Transmission Oil Pump Assembly Removal

^ Tools Required
- J 23129 Universal Seal Remover
- J 6125-1B Slide Hammer
- J 45053 Universal Clamp Press





1. Remove the turbine shaft front oil seal ring (2).





2. Using the J 23129 and the J 6125-1B, remove the torque converter oil seal assembly (201).





3. Remove the 7 oil pump bolt and seal assemblies (3).
4. Attach the J 45053 to the oil pump shaft. Tighten the bolts.
5. Turn the handle of the J 45053 down onto the turbine shaft in order to raise the oil pump assembly (4) out of the case.
6. Remove the oil pump assembly (4).
7. Remove the J 45053.





8. Remove the transmission oil pump gasket (6).

9. Important: The selective thrust washer (218) may be stuck to the pump cover.

Remove the selective thrust washer (218).