114. Generator and Drive Belt Tensioner Bracket Installation

Drive Belt Tensioner and Generator Mounting Bracket Installation





1. Install the drive belt tensioner and generator mounting bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the drive belt tensioner and generator mounting bracket bolts.
Tighten the drive belt tensioner and generator mounting bracket bolts to 50 Nm (37 ft. lbs.).





3. Install the electrical harness clip bolts.
Tighten the electrical harness clip bolts to 10 Nm (89 inch lbs.).





4. Install the drive belt tensioner.
5. Install the drive belt tensioner bolt.
Tighten the drive belt tensioner bolt to 50 Nm (37 ft. lbs.).





6. Install the electrical harness bracket.
7. Install the electrical harness bracket bolts.
Tighten the electrical harness bracket bolts to 10 Nm (89 inch lbs.).