118. Flywheel Housing Installation

Engine Flywheel Housing Installation





1. Install the oil cooler adapter with gaskets to the oil cooler.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the oil cooler adapter to oil cooler bolts.
Tighten the oil cooler adapter to oil cooler bolts to 21 Nm (15 ft. lbs.).





3. Install the flywheel housing to the cylinder block.
4. Install the flywheel housing bolts.
Tighten the flywheel housing bolts to 80 Nm (60 ft. lbs.).





5. Install a new gasket to the turbocharger oil return pipe.
6. Install the turbocharger oil return pipe to flywheel housing studs.
Tighten the turbocharger oil return pipe to flywheel housing studs to 10 Nm (89 inch lbs.).
7. Install the turbocharger oil return pipe nuts.
Tighten the turbocharger oil return pipe nuts to 25 Nm (18 ft. lbs.).