Instrument Panel Cluster (IPC) Replacement

INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT

REMOVAL PROCEDURE
1. Disconnect the battery negative cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Remove the instrument panel cluster trim plate.
3. Tilt the steering column fully down, if equipped with tilt steering.




4. Remove the screws (2) that retain the instrument cluster to the instrument panel carrier
5. Remove the instrument cluster (1) from the vehicle.

INSTALLATION PROCEDURE




1. Position the instrument cluster (1) to the vehicle.
2. Install the screws (2) that retain the instrument cluster to the instrument panel carrier.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

3. Install the instrument panel cluster trim plate.
4. Tilt the steering column to the up position, if equipped with tilt steering.
5. Connect the battery negative cable.