Oil Level Sensor: Service and Repair

Engine Oil Level Sensor and/or Switch Replacement

Removal Procedure





1. Raise and suitably support the vehicle.
2. Remove the drain plug and drain the oil into a suitable container.





3. Disconnect the oil level sensor electrical connector (7).





4. Remove the oil level sensor.

Installation Procedure






1. Install the drain plug.
^ Tighten the plug to 25 Nm (18 ft. lbs.).

Notice:
Refer to Fastener Notice in Service Precautions.






2. Install the oil level sensor.
^ Tighten the sensor to 20 Nm (15 ft. lbs.).





3. Connect the oil level sensor electrical connector (7).
4. Lower the vehicle.
5. Fill the engine with the proper quantity and grade of oil. Refer to Capacities - Approximate Fluid in Maintenance and Lubrication.