Operation CHARM: Car repair manuals for everyone.
Home >> GMC Truck >> 2006 >> Sierra 1500 2WD V8-5.3L VIN T >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Procedures >> Lumbar Switch Replacement

Lumbar Switch Replacement



LUMBAR SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Remove the power seat switch bezel containing the lumbar switch (1) from the seat.
2. Remove the lumbar switch screws from the power seat switch bezel.
3. Remove the lumbar switch.

INSTALLATION PROCEDURE
1. Install the lumbar switch to the power seat switch bezel.
2. Install the lumbar switch screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).




3. Install the power seat switch bezel (1) to the seat.
pro multis · About Operation CHARM