Auxiliary Battery Positive Cable Replacement - Battery Relay to Starter

BATTERY POSITIVE CABLE REPLACEMENT - BATTERY RELAY TO STARTER - AUXILIARY

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the auxiliary battery negative cable.
2. Reposition the boot.
3. Remove the auxiliary positive battery cable nut.
4. Remove the auxiliary positive battery cable from the auxiliary relay.
5. Remove the auxiliary positive battery cable clip from the battery tray.
6. Raise and suitably support the vehicle. Refer to Vehicle Lifting.




7. Remove the auxiliary cable clip bolt from the frame.




8. Remove the starter lead nut.
9. Remove the auxiliary positive battery cable from the starter stud.
10. Remove the auxiliary positive battery cable.

INSTALLATION PROCEDURE




1. Install the auxiliary positive battery cable.
2. Install the auxiliary positive battery cable to the starter stud.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the starter lead nut.

Tighten the nut to 9 N.m (80 lb in).




4. Install the auxiliary cable clip bolt to the frame.

Tighten the bolt to 10 N.m (89 lb in).

5. Lower the vehicle.




6. Install the auxiliary positive battery cable clip to the battery tray.
7. Install the auxiliary positive battery cable to the auxiliary relay.
8. Install the auxiliary positive battery cable nut.

Tighten the nut to 8 N.m (71 lb in).

9. Position the boot.
10. Connect the auxiliary battery negative cable.