Knee Bolster Replacement

Knee Bolster Replacement

Removal Procedure




1. Remove the I/P cluster trim plate bezel.




2. Remove the knee bolster screws.
3. Unsnap the top of the knee bolster from the I/P assembly.

Installation Procedure




1. Snap the top of the knee bolster into the I/P assembly.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the knee bolster screws.

Tighten the screws to 2 N.m (18 lb in).

3. Install the I/P cluster trim plate bezel.