81. Engine Coolant Air Bleed Pipe Installation

Coolant Air Bleed Pipe Installation





Important:
^ Install the pipe seals properly onto the pipe and covers.
^ Position the O-ring seal onto the nipple portion of the pipe.

1. Install the seals (308) onto the engine coolant air bleed pipe and covers.





2. Install the pipe (307) and seals (308) onto the cylinder heads.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the pipe bolts (309).
^ Tighten the pipe bolts to 12 Nm (106 inch lbs.).





4. Install the covers (313), seals (308), and bolts (312) onto the rear of the engine.
^ Tighten the cover bolts to 12 Nm (106 inch lbs.).





5. Install the hose (311) and clamps (310) onto the pipe (307).