105. Valve Rocker Arm Cover Installation - Lower Left Side

Valve Rocker Arm Cover Installation - Lower Left





Important: The gasket may be reused if it is not torn, cracked, stretched, or swollen.

1. Install the lower valve rocker arm cover.





Notice: Refer to Fastener Notice in Service Precautions.

2. Install the lower valve rocker arm cover bolts.
^ Tighten the lower valve rocker arm cover bolts in the proper sequence to 10 Nm (89 inch lbs.).
^ Retighten the lower valve rocker arm cover bolts in the proper sequence to the same torque, 10 Nm (89 inch lbs.).