Diagnostic System Check - Vehicle

DIAGNOSTIC SYSTEM CHECK

TEST DESCRIPTION

Step 1 - Step 5:

Step 6 - Step 10:

Step 11 - Step 12:

The numbers below refer to the step numbers on the diagnostic table.
1. This step insures that the battery, and the vehicle primary power and ground systems are functioning correctly.
3. Lack of communication may be due to a particular malfunction of a serial data circuit. The information in Data Link References will provide a list of modules and the associated data network no communication diagnostic link.
4. A module that is operating in the incorrect power mode based on key position may cause other vehicle symptoms and/or DTCs to set. The information in Power Mode Mismatch will correct the condition before checking for module DTCs or symptoms.
8. This step insures that all data link communication DTCs are diagnosed before system level DTCs.
9. This step insures that all electronic control unit (ECU) internal DTCs are diagnosed before other system level DTCs.
10. This step insures that all device voltage DTCs are diagnosed before other system level DTCs.